Rockford Fosgate P500x1bd Punch Mono Subwoofer Amp 500 Watts Rmsx1 At 1 Ohm

Rockford Fosgate P500x1bd Punch Mono Subwoofer Amp 500 Watts Rmsx1 At 1 Ohm

Rockford Fosgate P500x1bd Punch Mono Subwoofer Amp 500 Watts Rmsx1 At 1 Ohm

Rockford Fosgate P500x1bd Punch Mono Subwoofer Amp 500 Watts Rmsx1 At 1 Ohm

Rockford Fosgate P500x1bd Punch Mono Subwoofer Amp 500 Watts Rmsx1 At 1 Ohm

Rockford Fosgate’s Punch P500X1bd subwoofer amp can produce up to 500 watts RMS, giving you plenty of clean power for your rhythm track. And the P500X1bd can drive a 1-ohm load, so you can power multiple subs without any trouble. A low-pass filter keeps the high notes away from your sub, while a subsonic filter helps you rein in runaway boom. The Punch bass boost lets you add some of that boom back into the mix when it’s needed. Once again, Rockford Fosgate steps away from the crowd with their C. Technology (Calibrated Level Eliminates Audible Noise) a setup system that ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It’s that simple your amplifier is now set to match your receiver’s output. When your receiver reaches maximum clean volume, you’ll get maximum clean power from your Punch amp. At quiet listening levels, you’ll hear less background noise and more of your music. If that blue light turns solid red while you’re playing music, the amp’s telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music’s clipping. The amp’s built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won’t hurt anything. Rockford Fosgate’s Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better. Ratings shown are for the amp photoed. Ratings may vary slightly on the amp you receive. 150 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms). 500 watts RMS x 1 at 1 ohm. Variable low-pass filter filter (50-250 Hz, 12 dB/octave). Selectable subsonic filter (28Hz, 12 dB/octave). Variable PEQ2 bass boost (0-18 dB at 45 Hz). Gain setup system includes test tone CD. Test tones also available as MP3 download from Amazon On Demand, Rhapsody, Google Play, and Spotify, labeled 3sixty. 3 setup disc Punch amps and the 3sixty. 3 use the same test tone tracks for setup. Frequency response: 20-250 Hz. Dynamic Thermal Management and MEHSA MOSFET cooling systems. MOSFET power and output stages. Preamp inputs and outputs. Speaker-level inputs speaker wire to RCA adapter. Signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead. Optional PLC2 wired remote. Level control with clip light available. 4-gauge power and ground leads and an 80-amp fuse recommended wiring and hardware not included with amplifier. No onboard fuses when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended. 11-1/8″W x 2-7/16″H x 8-13/16D. The item “ROCKFORD FOSGATE P500X1BD PUNCH MONO SUBWOOFER AMP 500 WATTS RMSX1 AT 1 OHM” is in sale since Saturday, July 25, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers”. The seller is “sterlingmotorsinc” and is located in Sterling, Illinois. This item can be shipped worldwide.
  • Brand: Rockford Fosgate
  • Model: Punch
  • MPN: P500X1BD
  • Channels: Mono
  • RMS Power: 500

Comments

Comments are closed.