Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit

Car Audio & Video. Package: Rockford Fosgate Punch P2-2X12 Dual 12 Subwoofer Loaded In A Vented Enclosure – 1600 Watt Peak/800 Watt RMS + Rockville RXD-M3 1000 Watt RMS – CEA Compliant Mono Class D 1 Ohm Car Amplifier + Rockville RWK41 4 Gauge 2 Channel Complete Wire Kit With RCA Cables. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Rockford Fosgate P2-2X12 Dual 12 Loaded Car Subwoofer/Sub+Vented Enclosure/Box. (1) Rockville RWK41 4 Gauge Complete Car Amp Wire Kit w/RCA’s. Rockford Fosgate Punch P2-2X12 Dual 12 Subwoofer Loaded In A Vented Enclosure. 1600 Watts Peak Power/800 Watts RMS. Constructed With 5/8 MDF. High Current Binding Posts. Kevlar Reinforced Paper Cone. Dual Tear Resistant Poly Cotton Spiders. Tall Profile Santoprene Rubber Surround. High Temperature Voice Coil with Spun Laced Nomex Insulating Reinforced Collar. Optimized Motor Magnetic With Extended Pole and Bumped Back-Plate. Double Stack Ferrite Magnet Structure. Decorative Die Cast Aluminum Trim Ring. Woofer Series: Punch P2 (P2D4-12). Nominal Impedance: 1-Ohm – Internally wired to create a 1-Ohm amplifier load. Enclosure Material: 5/8 MDF (Medium Density Fiberboard). Speaker Connector: Up to 10 AWG compression terminals. Dimensions: 15.125″ x 33.875″ x 15.75 (38.4cm x 86.0cm x 40.0cm). Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer. The RXD-M3 is a class D monoblock high power amplifier with 4,000 watts peak output, 2,000 watts RMS output and 1000 watts CEA-2006 rated power. It is CEA-2006 compliant which makes it easy to compare this amplifier to other CEA compliant amps on the market. The issue the car audio world is facing today is that there are so many different brands with different standards on how they rate their products. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all our car amplifiers. This peak power is the amount of power the amp puts out at the loudest moments during a particular song. This formula almost always works within 20 %. 120 Amp External In-Line ANL Fuse Block. This unit also features a high speed MOSFET power supply and studio-grade bipolar output stage transistors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The RXD-M3 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels. The RXD mono amplifiers took years of engineering. A lot of new technology went into these amps. We call this technology optical coupler Class-D. This new technology gives the amplifier punchier bass compared with a typical class “D” amp. A major difference in our OC technology is the preamp input stage and output stage are separated in circuitry. It is less susceptible to noise, which typically is picked up from the preamp input. The RCA input accepts both balanced and un-balance inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise. The Phenom amps by Rockville use only the top parts. We use Siemens correction capacitors which are well-known for producing crystal clear sound quality. We use TL072 OP (power supply) which is composed of mosfets. Typical class “D” amps use JRC4558, which is composed of transistors only. Mosfet power supplies have a higher speed, lower loss rate, lower noise, and ultimately supply more efficient and clean power along with lower THD (distortion). We redesigned the layout of the PCB boards to allow the amp to run smooth and cool. Each and everything amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and do random inspections of the power and over 20 other tests. We guarantee these amps will satisfy you. (Amp must be complete along with the box). Rockville RXD-M3 4000 Watt/2000w RMS Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology. CEA Compliant Power Ratings. (Rated at less than 1 % distortion). (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 1 Ohm: 1000 Watts x 1 Channel <1% THD+N. 2 Ohm: 750 Watts x 1 Channel <1% THD+N. 4 Ohm: 550 Watts x 1 Channel <1% THD+N. (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 1 Ohm: 2000 Watts x 1 Channel. 2 Ohm: 1500 Watts x 1 Channel. 4 Ohm: 1100 Watts x 1 Channel. Peak: The amount of power the amplifier can produce for a split second at the loudest part of a song. 1 Ohm: 4000 Watts x 1 Channel. 2 Ohm: 3000 Watts x 1 Channel. 4 Ohm: 2200 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class "D" Technology. Studio-Grade Bipolar Output Stage Transistors. Now exclusively with "Professional Peak Limiter Circuitry" which guarantees distortion free musical playback at all levels. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: > 100dB. Frequency Response: 10Hz – 500Hz. Dimensions: (W x H x L) 8.5 x 1.8 x 14.5. About Rockville Quality Control Procedures. The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. Unboxing Video for RWK41. The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point. Our RCA cables are 100 % copper. These are top of the line RCA cables. This is a measurement of conductivity and how much signal is loss per foot of wire. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F. The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels. This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car. Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make! 1 – 17′ High Grade Twisted Pair of 100% Copper RCA Cable. 17′ – 4 Gauge Translucent Blue SuperFlex Power Cables. 17′ – 18 Gauge Blue Remote Cable. 17′ – 16 Gauge Clear Speaker Wire. 3′ – 4 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7′ Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. If your item is defective within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. If you want to return your item within the first 30 days of when it was delivered to you; you have the following options. This includes blown speakers with burned voice coils. Process for returning items. The item “Rockford Fosgate P2-2X12 Dual 12 Loaded Vented Car Subwoofer Box+Amp+Wire Kit” is in sale since Monday, February 13, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Subwoofers”. The seller is “audiosavings” and is located in Inwood, New York. This item can be shipped to United States, Canada, United Kingdom, Australia.
  • Brand: Rockford Fosgate
  • MPN: P2-2X12+RXD-M3+RWK41
  • UPC: 613815962540
  • Type: Enclosed Powered
  • Model: P2-2X12+RXD-M3+RWK41
  • Speaker Size: 12in.
  • Voice Coil: Dual
  • RMS Power: 800W
  • Country/Region of Manufacture: China

Comments

Comments are closed.