Rockford Fosgate P1000X1BD 1000 Watt Class BD Monoblock Amplifier Mono Car Amp

Rockford Fosgate P1000X1BD 1000 Watt Class BD Monoblock Amplifier Mono Car Amp

Rockford Fosgate P1000X1BD 1000 Watt Class BD Monoblock Amplifier Mono Car Amp

Rockford Fosgate P1000X1BD 1000 Watt Class BD Monoblock Amplifier Mono Car Amp

Rockford Fosgate P1000X1BD 1000 Watt Class BD Monoblock Amplifier Mono Car Amp. The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers. 300 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms). 1000 watts RMS x 1 at 1 ohm. Variable low-pass filter filter (50-250 Hz, 12 dB/octave). Selectable subsonic filter (28Hz, 12 dB/octave). Variable PEQ2 bass boost (0-18 dB at 45 Hz). Gain setup system includes test tone CD. Test tones also available as MP3 download from Amazon On Demand, Rhapsody, Google Play, and Spotify, labeled 3sixty. 3 setup disc Punch amps and the 3sixty. 3 use the same test tone tracks for setup. Frequency response: 20-250 Hz. Dynamic Thermal Management and MEHSA MOSFET cooling systems. MOSFET power and output stages. Preamp inputs and outputs. Speaker-level inputs (speaker wire to RCA adapter required). Signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead. Optional PLC2 wired remote level control with clip light available. 4-gauge power and ground leads and an 140-amp fuse recommended wiring and hardware not included with amplifier. No onboard fuses when installing multiple amps in a system, an additional 140-amp in-line fuse between the distribution block and the amplifier is recommended. 13-3/8″W x 2-7/16″H x 8-13/16D. NOTE: Any return that does not have a return authorization number written on the outside of the package will not be accepted. Sound of Tri-State has the sole discretion as to what is warrantied. It is our intention to keep you, the customer happy. After 14 days from your receipt date, defective items may be repaired or replaced at Sound of Tri-State’s discretion Except Remanufactured products, which are only repaired. We have trained technicians on staff and ready to help with you with any questions. If our phones are busy we do have an answering machine and do check our messages regularly. Leave your name and number and the item number in question. We will return your call asap! We are open Monday to Friday from 10 a. EST (Eastern Standard Time). Office Addresss: Sound of Tri-State, 333 Naamans Rd. Ste 41 Claymont DE 19703. The item “Rockford Fosgate P1000X1BD 1000 Watt Class BD Monoblock Amplifier Mono Car Amp” is in sale since Tuesday, October 03, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers”. The seller is “soundoftristate” and is located in Claymont, Delaware. This item can be shipped to United States, Canada.
  • Brand: Rockford Fosgate
  • MPN: P1000X1BD
  • Channels: Mono
Hifonics Brutus BRX3016.1D 3000 Watt RMS Class D Mono Amplifier Car Amp sub

Hifonics Brutus BRX3016.1D 3000 Watt RMS Class D Mono Amplifier Car Amp sub

Hifonics Brutus BRX3016.1D 3000 Watt RMS Class D Mono Amplifier Car Amp sub

Hifonics Brutus BRX3016.1D 3000 Watt RMS Class D Mono Amplifier Car Amp sub

Hifonics Brutus BRX3016.1D 3000 Watt RMS Class D Mono Amplifier Car Amp sub

Hifonics Brutus BRX3016.1D 3000 Watt RMS Class D Mono Block Car Amplifier With Bass Remote and Ultra-Fi MOSFETS for Max Power Efficiency. Hifonics Brutus BRX3016.1D 3000 Watt RMS Class D Mono Block Car Amplifier+Bass Remote. Ultra-Fi MOSFETS Circuit maximizing power efficiency while improving sound quality. LED power (green) and protect (red) indicators. Preamp RCA outputs to daisy chain multiple amps. Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo. Lighted connectors and blue wash of light from the underside of the heatsink. DC, Short Circuit, Thermal and Overload Protection. Signal to Noise Ratio: >95dB. Variable subsonic filter (15-35 Hz). Variable low-pass filter (35-250 Hz). Dimensions: 17.7″L x 2.4″W x 9.8H. The item “Hifonics Brutus BRX3016.1D 3000 Watt RMS Class D Mono Amplifier Car Amp sub” is in sale since Thursday, October 12, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers”. The seller is “discountsjungle” and is located in Los Angeles, California. This item can be shipped to United States.
  • Brand: Hifonics
  • Model: Hifonics BRX3016.1D
  • MPN: ZRX3216.1D Zeus elite rockford fosgate
  • Channels: Mono
  • RMS Power: 3000W
Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit

Car Audio & Video. Package: Rockford Fosgate Prime M600-4D 600 Watt 4-Channel Class D Marine Amplifier With A Conformal Coated PCB and UV Resistant Finish For UV, Salt, and Fog Protection + Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Rockford Fosgate Prime M600-4D 600 Watt Amplifier. (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier Installation Wire Kit. Rockford Fosgate Prime M600-4D 600 Watt 4 Channel Class D Marine Amplifier. Conformal coated PCB and UV resistant finish for UV & Salt-Fog protection. 4 Gauge power/ground connectors. Tri-stage protection covers thermal, over-current and short circuits. Number of Channels: 4. Total Power (Sum of Rated Power): 600 Watts RMS Dynamic Power. Signal Input: Low Level: 2 RCA Pair. Signal Output: Low Level: 1 RCA Pair. Power Input Connector : Block. Power Wire Gauge: 4 AWG. Speaker Output Connector : Block. Speaker Wire Gauge: 12 AWG. Heat Sink Type: Cast Aluminum. Visual Indicators: Power Protect. Circuit Topology Class : Full Range Class-D. Frequency Response: 20Hz to 20kHz +/-1dB. Dimensions (HxWxL): 1.97″ x 6.77″ x 11.06 (5cm x 17.20cm x 28.10cm). Unboxing Video of RMWK4. Rockville’s exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed! Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers. Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease. Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great. Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit. 25′ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable. 20′ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3′ Black Poly Woven Mesh to better resist chemicals in the battery compartment. 4′ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable. 25′ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable. 20′ Blue Remote Wire. 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring. 1PC 60A Mini-ANL Fuse. 5PCS Speaker Cable Terminals. 10PCS White Cable Ties. About Rockville Quality Control Procedures. The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. If your item is defective within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. If you want to return your item within the first 30 days of when it was delivered to you; you have the following options. This includes blown speakers with burned voice coils. Process for returning items. The item “Rockford Fosgate M600-4D 600w 4-Channel Class D Marine Amplifier+Marine Amp Kit” is in sale since Saturday, December 17, 2016. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Marine Audio”. The seller is “audiosavings” and is located in Inwood, New York. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Rockford Fosgate
  • MPN: M600-4D+RMWK4
  • UPC: 780687340810
  • Model: M600-4D+RMWK4
  • Retail Price: 529.9800
  • Type: Amplifier
  • Warrantied Through: AUDIOSAVINGS
  • Warranty: 1 YEAR
2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring

Car Audio & Electronics. Pro Audio & Sound. Beauty & Personal Care. Tools & Home Improvement. Patio, Lawn & Garden. 2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring. Part Number: 2 x P2D2-12 + VM-ECD2500.1 + VM-SRSK4B. TWO NEW Rockford Fosgate P2D2-12 12 1600 Watt 2-Ohm Punch Series Car Audio Subwoofers. 800 Watts MAX per sub (1600 watts per pair). 400 Watts RMS per sub (800 watts per pair). These two Rockford Fosgate P2D2-12 12″ 1600 Watt 2-Ohm Punch Series Car Audio Subwoofers will provide “The Punch you desire. These subs feature Kevlar fiber reinforced paper cones that will deliver superior bass impact; VAST technology that increases the cone surface area up to 25%; an Anodized Voice Coil Former that provides superior heat dissipation (up to 100&###xB0; at full power levels); A Flex Fit Basket that allows fine-tuning of the mounting position; Stitched Tinsel Leads that reduces fatigue and possible shorting and increasing reliability and performance. If you are looking for thumping bass, look no further than the Rockford Fosgate P2D2-12 12 1600 Watt 2-Ohm Punch Series Subwoofers! We are an authorized Rockford Fosgate dealer. View the Owners Manual. Kevlar fiber reinforced paper cone. Anodized Aluminum Voice Coil Former. Dual linear spider with embedded 16 AWG tinsel leads. Custom 10-AWG nickel plated push terminals. StampCast basket with integrated spider venting. Protective PVC textured magnet cover. High-temp voice coil with spun-laced Nomex&###xAE; re-inforcement collar. Extended pole piece and bumped vented backplate. Diamond cut cast aluminum trim ring with optional grille (grille insert not included). Nominal Impedance: Dual 2-Ohm. Voice Coil Diameter: 2.25 (57.7 mm). Magnet Weight: 78.8 oz. Speaker Connector: Dual 10 AWG compression. Re (Ohms): 3.30. Le (mH): 3.7. Vas (Liters): 81.5. Xmax (mm): 13.3. Subwoofer Displacement: 0.170 Cu. Cutout Diameter: 11.22 Inches (285 mm). Mounting Depth: 6.40 Inches (162.6 mm). Grille insert not included. VM Audio ECD2500.1 CLASS D DIGITAL AMPLIFIER SPECIFICATIONS. RMS Power 4 Ohms: 625W x 1. RMS Power 2 Ohms: 1250W x 1. RMS Power 1 Ohm: 2500W x 1. Frequency Response: 10Hz &###x2013; 180Hz. Lowpass Crossover: 40Hz &###x2013; 180Hz. Subsonic: 0Hz &###x2013; 50Hz. Bass Boost Frequency: 30Hz &###x2013; 80Hz. Bass Boost: 0dB &###x2013; 12dB. Input Voltage: 0.12V &###x2013; 4.2V. Fuse 30A x 4. Dimensions (L x W x H): 15.51&###x201D; x 9.65&###x201D; x 2.17&##x201D. VM Audio 4 Gauge SRSK4B Wiring Kit. 16 Ft blue 4 gauge power wire. 3 ft silver 4 gauge ground wire. 15 ft high performance RCA wire. 4 Gauge In-line AGU fuseholder. 60 Amp AGU fuse. 15 ft 18 Gauge Remote wire. 20 ft 12 gauge Speaker wire. 20 6 wire ties. Cable firewall black rubber gromments. Product Condition: Brand New. Located in the heartland of America, we here at VM Audio love to design high-quality, affordable solutions for all of your car audio, marine, and multimedia needs. Established in 2012, we launched with the intention to create the finest home and car audio products and accessories available. Our VM Audio engineers are passionate audiophiles that demand stellar sound quality, elegant design, and the deepest, loudest bass. Preferred by professionals around the world, all of our products are custom-engineered and designed to provide the best combination of excellent value, clean sound, and cutting-edge appearance. We at VM Audio offer three innovative product levels to ensure that users from all backgrounds can enjoy their music to its absolute fullest, just like the pros. Cancelling Your Order: &###xA0;Your order is important to us and will be processed immediately. Select the reason for the return. View more great items. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “2 Rockford Fosgate P2D2-12 12 1600W 2-Ohm Punch Subs + Class D Amp + Wiring” is in sale since Tuesday, March 17, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Subwoofers”. The seller is “vminnovations” and is located in Lincoln, Nebraska. This item can be shipped to United States.
  • Type: Non-Enclosed Subwoofer
  • Brand: Rockford Fosgate
  • Model: P2D2-12
  • Speaker Size: 12″
  • RMS Power: 400 W
  • MPN: 2 x P2D2-12 + VM-ECD2500.1 + VM-SRSK4B
Rockford Fosgate M750-1D Monoblock Sub Class D Marine Boat Amplifier 750W New

Rockford Fosgate M750-1D Monoblock Sub Class D Marine Boat Amplifier 750W New

Rockford Fosgate M750-1D Monoblock Sub Class D Marine Boat Amplifier 750W New

Rockford Fosgate M750-1D Monoblock Sub Class D Marine Boat Amplifier 750W New

Rockford Fosgate M750-1D Monoblock Sub Class D Marine Boat Amplifier 750W New

Rockford Fosgate M750-1D Monoblock Sub Class D Marine Boat Amplifier 750W New

Car Audio & Video. Install Accessories & Security. Home Audio & Video. Rockford Fosgate M750-1D Monoblock Sub Class D Marine Boat Amplifier 750W New. Monoblock Class D Marine Amplifier. 4 ohms: 250 watts x 1 chan. 2 ohms: 500 watts x 1 chan. 1 ohms: 750 watts x 1 chan. UV resistant and Salt-fog marine protection. Pulse Width Modulated MOSFET power supply. LED power (green) and protect (red) indicators. Punch EQ (0 to +18 dB bass boost at 45 Hz). Preamp RCA output to daisy chain multiple amps. 3-way protection circuitry (thermal, overload, and speaker short protection). High-density split-dome convection heat-sink for extreme heat dissipation. Nickel-plated RCA level inputs. Variable low-pass filter (50-250 Hz, 24 dB/octave Butterworth). Variable 15-40Hz 12dB/octave infrasonic filter. Frequency response: 20-250 Hz. 4 gauge power and ground wiring is required for installation. One (1) Rockford Fosgate M750-1D 750W RMS Monoblock Class D Marine Amplifier. Since founded in 2001, customers have always been at the core of everything we do. Our enthusiastic audiophile staff are here to create the best sound systems that work for you and your needs. Dynamic Autosound 3201 S. Expedited Services are also available. Acceptance of Contract Terms The following forms a legal agreement between you and Dynamic Autosound Inc. By using this site you are acknowledging that you have read, understood, and agree to be bound by these terms and all applicable laws and regulations. If you do not agree to these terms please do not use this site. Any claim relating to the use of this site, its materials and any sales thereunder is governed by the laws of the Commonwealth of California, without regard to conflict of laws rules and California will be the sole jurisdiction and venue for any litigation arising from the use of or orders made on the site. Dynamic Autosound is pleased to offer this website for the benefit of our customers and the general public. Feel free to enjoy the site as much as you like. Your choice to visit our website or to take advantage of its features does not create an agency relationship between you and Dynamic Autosound. You are free to browse our site and use its features, and in doing so you are not acting on our behalf. To the extent Dynamic Autosound provides instructions on how to use or take advantage of any feature of the site, you are under no obligation to use or take advantage of that feature. The instructions Dynamic Autosound provides are intended solely to inform you how to take advantage of any such feature, should you in your sole discretion ultimately decide to do so. Except as stated herein, none of the material may be copied, reproduced, distributed, republished, downloaded, displayed, posted or transmitted in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Dynamic Autosound. This permission terminates automatically if you breach any of these terms or conditions or upon the request of Dynamic Autosound. Upon termination you must immediately destroy any downloaded and printed materials. You also can not “mirror” any material contained on this site. Trademarks The trademarks, service marks and logos (the “Trademarks”) used and displayed on this site are registered and unregistered Trademarks of Dynamic Autosound and others. Dynamic Autosound enforces its intellectual property rights to the fullest extent of the law. Dynamic Autosound prohibits use of the Dynamic Autosound logo as a “hot” link to the Dynamic Autosound site unless establishment of such a link is approved in advance by Dynamic Autosound in writing. DYNAMIC AUTOSOUND DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE, VALIDITY, ACCURACY, OR RELIABILITY OF, OR THE RESULTS OF THE USE OF, OR OTHERWISE RESPECTING, THE MATERIALS OR PRODUCTS ON THIS SITE OR ANY SITES LINKED TO THIS SITE. Limitation of Liability UNDER NO CIRCUMSTANCES, INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE, SHALL DYNAMIC AUTOSOUND BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, HARM TO EQUIPMENT AND/OR PERSONAL INJURY OR DEATH, ARISING OUT OF THE USE, OR THE INABILITY TO USE, THE MATERIALS ON THIS SITE, EVEN IF DYNAMIC AUTOSOUND OR A DYNAMIC AUTOSOUND AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IF YOUR USE OF MATERIALS FROM THIS SITE RESULT IN THE NEED FOR SERVICING, REPAIR OR CORRECTION OF ANY ITEM YOU ASSUME ANY COST THEREOF. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. Typographical Errors In the event a product is listed at an incorrect price due to a typographical error, entry error or error in pricing information received from our suppliers, Dynamic Autosound shall have the right to refuse or cancel any orders placed for said product(s). Order Acceptance Policy Your receipt of an electronic or other form of order confirmation does not signify our acceptance of your order, nor does it constitute confirmation of our offer to sell. Dynamic Autosound reserves the right at any time after receipt of your order to accept or decline your order for any reason. Transmissions Any material, information or idea you transmit to or post on this site by any means will be treated as non-confidential and non-proprietary, and may be disseminated or used by Dynamic Autosound or its affiliates for any purpose whatsoever. Notwithstanding the foregoing, all personal data provided to Dynamic Autosound will be handled in accordance with Dynamic Autosound’s Privacy Policy. You are prohibited from posting or transmitting to or from this site any unlawful, threatening, libelous, defamatory, obscene, scandalous, inflammatory, pornographic or profane material or any other material that could give rise to any civil or criminal liability under the law. Children’s Online Policy Dynamic Autosound is committed to the preservation of online privacy for all of its web site visitors, including children. Consistent with the Children’s Online Privacy Protection Act, we will not knowingly collect any personally identifiable information from children under the age of 13. If you are a child under the age of 13, you must ask your parent or guardian to assist you in using Dynamic Autosound. Com. Term of Use Revisions Dynamic Autosound may at any time revise these Terms of Use by updating this posting. By using this site, you agree to be bound by any such revisions and should therefore periodically visit this page to determine the then current Terms of Use to which you are bound. All items we sell are GUARANTEED fully operational. This associated cost is non-refundable. Items improperly installed are not considered defective. Abused items are not considered defective. Add to Favorite Sellers. Sign up to Newsletter. View more great items. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Rockford Fosgate M750-1D Monoblock Sub Class D Marine Boat Amplifier 750W New” is in sale since Tuesday, July 21, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Marine Audio”. The seller is “dynamicautosound” and is located in Santa Ana, California. This item can be shipped worldwide.
  • Type: Amplifier
  • Brand: Rockford Fosgate
  • Model: Fosgate Car Stereo Mono Subwoofer Amp 750W
  • MPN: Rockford Fosgate M750-1D (M7501D) Subwoofer Amp
  • RMS Power: 750W
  • Channels: Mono
Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit

Product SKU: 126619 ID: r300x4_bak44. Car Audio & Video. Car Security & Safety. Rockford Fosgate Prime R300X4 + Complete 4 AWG Amp Kit. 300W 4-Channel Class AB Prime Series Full Range Amplifier + Amp Kit. Item Condition: Brand New. Rockford Fosgate Prime R300X4. 300W 4-Channel Class AB Prime Series Full Range Amplifier Quantity: 1. Prime Series Full Range Class AB 4-Channel Car Amplifier. 4 ohms: 50 watts x 4 chan. 2 ohms: 75 watts x 4 chan. Bridged, 4 ohms: 150 watts x 2 chan. Pulse Width Modulated MOSFET power supply. LED power (green) and protect (red) indicators. 4, 3 or 2 channel operation. Speaker-level (high-level) inputs with included molex plugs. 3-way protection circuitry (thermal, overload, and speaker short protection). Heavy duty aluminum alloy heat-sink for extreme heat dissipation. Low level: 150mV – 4V. High level: 450mV – 12V. Frequency Response: 20 – 20,000 Hz. Total Harmonic Distortion (THD). Signal to Noise Ration: >100 dB. Selectable crossover modes: LP / AP / HP. Variable crossover filter: 50 – 250 Hz, 12 dB/octave. Selectable Bass Boost, Punch EQ: 0, +6db, +12 dB bass boost at 45 Hz. 8 – 16 gauge speaker terminals. 4 – 8 gauge power and ground wiring is recommended for installation. For our contact information. 8 Gauge is perfect for a full 4 ohm setup, while 4 Gauge is recommended for a full 2 ohm setup. 50 Amp In-line fuse is highly recommended, not included. Dimensions: 13.2″ W x 6.8″ D x 2 H. Complete 4 Gauge Amplifier Wiring Kit with 4-Channel RCA Interconnects (CCA Wiring) Quantity: 1. Complete 4 Gauge 4-Channel Amplifier Installation Kit. Designed specifically for car audio systems up to 1000 watts RMS. Premium Powerflex power and ground wire provides optimal power transfer. Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal. Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper. Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference. In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems. Also available as 2-Channel Kit. (5.2 meters) Red 4 gauge power wire. 91 meters Black 4 gauge ground wire. (5.2 meters) Gray 18 gauge remote lead wire. (5.2 meters) Helical Twist 4-channel RCA interconnect cable. One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse. One Black rubber firewall grommet. One 4 Gauge red chrome plated ring terminals. One 4 Gauge black chrome plated ring terminal. Three 18 Gauge red Spade terminal. Two 18 Gauge black Spade terminal. One 18 Gauge red butt connector. Ten 4 Black zip ties. This kit is CCA (Copper Clad Aluminum). Watch this video to learn why you should choose an OFC Amp Kit! For Premium OFC kits! Power Specifications – Full Range Channels. Total Peak Power Output. Total RMS Power Output. Maximum Input Gauge Size. THD at Rated RMS Power. Yes – with included adapter. Low-Pass (LP) High-Pass (HP) Full (AP). 50A Fuse Recommended, Not Included. Number of Amplifiers Supported. Interconnect (RCA) Signal Cables Included. Big 3 Upgrade Kits. Get the kit you need to upgrade your factory battery ground wire, alternator ground wire and alternator power wire. XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit. The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire. XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit. The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire. NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper. 1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps. Policies for US and Canadian Customers. Return for replacement within: 30 days. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. You will be required to complete our product return form which will also provide helpful instructions for your return. Foam, plastic, wrappings, etc. Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging. Any product that exhibits physical damage or abuse. Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. Return to top of policies. SHIPS THE SAME DAY. American Owned & Operated. Internet Retailer Top 500. 15148 Bledsoe St. Unit B, Sylmar, CA 91342 USA. Prices, specifications, and images are subject to change without notice. The item “Rockford Fosgate R300X4 300W RMS 4 Channel Class A/B Car Amplifier + Amp Kit” is in sale since Friday, September 22, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers”. The seller is “www-sonicelectronix-com” and is located in Louisville, Kentucky. This item can be shipped to United States.
  • Brand: Rockford Fosgate
  • Model: R300X4, BAK44
  • MPN: R300X4, BAK44
  • RMS Power: 300W
  • Channels: 4
  • Bundle Listing: Yes
Rockford Fosgate 1000 Watt Class AD Car Amplifier Power Amp T10004AD T1000-4AD

Rockford Fosgate 1000 Watt Class AD Car Amplifier Power Amp T10004AD T1000-4AD

Rockford Fosgate 1000 Watt Class AD Car Amplifier Power Amp T10004AD T1000-4AD

Rockford Fosgate T1000-4AD 1000 Watt Class AD Car Amplifier Power Amp T10004AD. 250 watts RMS x 4 at 1 to 4 ohms. 500 watts RMS x 2 bridged output at 2 ohms (2-ohm stable in bridged mode). Dynamic Thermal Management cooling system. Differential Input circuitry eliminates hum. Variable high- and low-pass filters (50-500 Hz, 24 dB/octave). Variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz). Optional remote bass/treble boost. Class-AD amplifier design with Constant Power. Preamp inputs and outputs. 4-gauge power and ground leads and a 150-amp fuse recommended wiring and hardware not included with amplifier. No onboard fuses when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 14-7/8″W x 2-1/4″H x 9-1/8D. NOTE: Any return that does not have a return authorization number written on the outside of the package will not be accepted. Sound of Tri-State has the sole discretion as to what is warrantied. It is our intention to keep you, the customer happy. After 14 days from your receipt date, defective items may be repaired or replaced at Sound of Tri-State’s discretion Except Remanufactured products, which are only repaired. We have trained technicians on staff and ready to help with you with any questions. If our phones are busy we do have an answering machine and do check our messages regularly. Leave your name and number and the item number in question. We will return your call asap! We are open Monday to Friday from 10 a. EST (Eastern Standard Time). Office Addresss: Sound of Tri-State, 333 Naamans Rd. Ste 41 Claymont DE 19703. The item “Rockford Fosgate 1000 Watt Class AD Car Amplifier Power Amp T10004AD T1000-4AD” is in sale since Friday, September 29, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers”. The seller is “soundoftristate” and is located in Claymont, Delaware. This item can be shipped to United States, Canada.
  • Brand: Rockford Fosgate
  • MPN: T1000-4AD
  • Channels: 4
REFURBISHED Rockford Fosgate 1000 Watt Class AD Car Amplifier Power Amp T10004AD

REFURBISHED Rockford Fosgate 1000 Watt Class AD Car Amplifier Power Amp T10004AD

REFURBISHED Rockford Fosgate 1000 Watt Class AD Car Amplifier Power Amp T10004AD

Rockford Fosgate T1000-4AD 1000 Watt Class AD Car Amplifier Power Amp T10004AD. 250 watts RMS x 4 at 1 to 4 ohms. 500 watts RMS x 2 bridged output at 2 ohms (2-ohm stable in bridged mode). Dynamic Thermal Management cooling system. Differential Input circuitry eliminates hum. Variable high- and low-pass filters (50-500 Hz, 24 dB/octave). Variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz). Optional remote bass/treble boost. Class-AD amplifier design with Constant Power. Preamp inputs and outputs. 4-gauge power and ground leads and a 150-amp fuse recommended wiring and hardware not included with amplifier. No onboard fuses when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 14-7/8″W x 2-1/4″H x 9-1/8D. NOTE: Any return that does not have a return authorization number written on the outside of the package will not be accepted. Sound of Tri-State has the sole discretion as to what is warrantied. It is our intention to keep you, the customer happy. After 14 days from your receipt date, defective items may be repaired or replaced at Sound of Tri-State’s discretion Except Remanufactured products, which are only repaired. We have trained technicians on staff and ready to help with you with any questions. If our phones are busy we do have an answering machine and do check our messages regularly. Leave your name and number and the item number in question. We will return your call asap! We are open Monday to Friday from 10 a. EST (Eastern Standard Time). Office Addresss: Sound of Tri-State, 333 Naamans Rd. Ste 41 Claymont DE 19703. The item “REFURBISHED Rockford Fosgate 1000 Watt Class AD Car Amplifier Power Amp T10004AD” is in sale since Friday, September 29, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers”. The seller is “soundoftristate” and is located in Claymont, Delaware. This item can be shipped to United States, Canada.
  • Brand: Rockford Fosgate
  • MPN: T1000-4AD
Rockford Fosgate Power T400x2ad Motorcycle Car Amp 525 + Watt 2 Channel Class Ad

Rockford Fosgate Power T400x2ad Motorcycle Car Amp 525 + Watt 2 Channel Class Ad

Rockford Fosgate Power T400x2ad Motorcycle Car Amp 525 + Watt 2 Channel Class Ad

Rockford Fosgate Power T400x2ad Motorcycle Car Amp 525 + Watt 2 Channel Class Ad

Rockford Fosgate Power T400x2ad Motorcycle Car Amp 525 + Watt 2 Channel Class Ad

Rockford Fosgate Power T400x2ad Motorcycle Car Amp 525 + Watt 2 Channel Class Ad

Rockford Fosgate Power T400x2ad Motorcycle Car Amp 525 + Watt 2 Channel Class Ad

Rockford Fosgate Power T400x2ad Motorcycle Car Amp 525 + Watt 2 Channel Class Ad

Rockford Fosgate Power T400X2ad. Compact 2-channel car amplifier 200 watts RMS x 2. Super-compact, bursting with power. Rockford Fosgate’s Power Series T400X2ad 2-channel amplifier can send each of your speakers up to 200 watts RMS, or you can use this tiny powerpack to run a sub with up to 400 watts. A dual-fan forced air cooling system keeps this sturdy little amp from overheating, so it can play hard for a long, long time. Class AD: accurate and powerful. Rockford Fosgate uses their proprietary Class AD amplifier technology, combining the high fidelity of a Class A system with the high efficiency of their special Class D technology, to bring you this ultra-efficient, high-output amplifier. In other words, this compact amp produces more power with less current draw from your vehicle’s charging system than most other amps on the road today. Rockford Fosgate’s high-tech solutions yield more power. Power Series amplifiers actively monitor speaker performance using Rockford Fosgate’s Constant Power technology. A speaker’s impedance naturally fluctuates as it performs, fighting against your amp’s output. So, just like your cruise control increases the engine’s RPM to maintain your car’s speed uphill, Constant Power maintains this amp’s output by increasing its internal voltage and current flow when the speaker’s impedance rises. This results in up to a 25% increase in the amp’s total power output. Rockford Fosgate’s C. Technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until the red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It’s that simple your amplifier will be perfectly set to match your receiver’s output. When your receiver reaches maximum clean volume, you’ll get maximum clean power from your Power amp. At quiet listening levels, you’ll hear less background noise and more of your music. Easy to set for optimum performance. If that blue light turns solid red while you’re playing music, the amp’s telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music’s clipping. 200 watts RMS x 2 at 2 to 4 ohms. 400 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode). Class AD amplifier design. Constant Power technology maintains full output power despite impedance changes. Gain setup system includes clip lights and test tone CD. Differential input circuitry helps eliminate hum. Dual-fan forced induction cooling. Variable high- and low-pass filters (50-250 Hz, 12 dB/octave). Variable Punch EQ (bass/treble boost: 0-18 dB at 45 Hz, 0-14 dB at 12,500 Hz). Optional PLC2 Punch Level Control wired remote with clip light available. Preamp and speaker-level inputs. Signal-sensing turn-on with speaker-level inputs eliminates need for remote turn-on lead. 8-gauge power and ground leads and a 60-amp fuse recommended wiring and hardware not included with amplifier. No onboard fuses when installing multiple amps in a system, an additional 60-amp in-line fuse between the distribution block and the amplifier is recommended. 7″W x 1-15/8″H x 4-1/4D. Overview: The Rockford Fosgate Power T400X2ad is an ultra-compact two-channel amplifier. Even though the amplifier is only 7-3/8″ x 4-1/4″, it puts out 200 watts per channel at 4 ohms or 2 ohms. In bridged mono, the output is 400 watts at 4 ohms. Class AD: The amplifier features Rockford Fosgate’s proprietary Class AD technology, which allows the amp to produce more power with less current draw. It takes the highly efficient bd amplifier design to a full-range application. Class AD uses Dynamic Frequency Switching to increase the switching frequency during lower output levels for better signal resolution. In addition, Post Choke Feedback Filtering removes unwanted distortion by comparing the input signal to the output signal at the speaker connector. Constant Power: Rockford Fosgate uses a patented circuit design to gain up to 25% more output power. Constant Power actively increases the voltage and current in direct relationship to the rise and fall of music signals to provide additional power. Fan Cooled: The T400X2ad features dual fans to keep the amp running cool. Dual Fan Forced Induction pulls in fresh air, which pulls heat off of the MOSFETs, and directs airflow into the exhaust channel and out of the amplifier. Since the top and bottom heat sinks are decoupled, the top remains cool to the touch. When installing, you should leave at least 2-3 of clearance around the ends of the amplifier to optimize air flow to the fan intake and exhaust vents. Technology: Using Rockford’s C. (Calibrated Level Eliminates Audible Noise) technology, you can easily and precisely set up the amplifier levels to eliminate distortion from damaging your speakers. Simple LED indicators are used, instead of test equipment, to identify signal clipping at both the input and output, and to match the audio source to the amplifier. Top Mounted Controls: The T400X2ad features easy-to-reach controls on the top panel of the amplifier. Input Level: This rotary control lets you match the output of the audio source to the amplifier. A small screwdriver (not included) is required to set the level. Punch EQ: The Gyrator-based Punch EQ eliminates frequency shift with boost. It works in conjunction with the crossover switch on the amplifier. When set to Low-Pass operation, it functions as a 0 to +18dB variable Bass Boost at 45Hz. When set to High-Pass, it is a 0 to +14dB variable Mid-Bass and Treble Boost at 12.5kHz. When set to All-Pass, the Punch EQ boosts both the bass and treble frequencies. A small screwdriver (not included) is required to set the amount of boost desired. Crossover Switch: This 3-way switch lets you select Low-Pass (LP), High-Pass (HP), or All-Pass (AP) on the Butterworth crossover. Frequency: The crossover frequency is constantly variable between 50Hz and 250Hz with a slope of 12dB/octave. A small screwdriver (not included) is required to set the crossover cut-off frequency. LED Indicators: The amplifier has three LED indicators on its top panel. Input Clip Indicator: The input clip indicator works in conjunction with the audio source’s volume knob. It will illuminate red when the audio source reaches its clipping point. Output Clip Indicator: The output clip indicator works in conjunction with the amplifier’s input level knob. It will illuminate red when the output level has reached the clipping point. When setting the level using test tones, you should adjust the output level until the LED glows blue. If setting the output level using music, the LED should glow blue with only an occasional red indication. Power/Protect: The Power LED illuminates blue when the unit is turned on. If the LED turns yellow, a short circuit or too low of an impedance has been detected at the speaker connections. If the LED turns red, the amp has overheated and has shut down. Left Side of Amplifier. Remote Punch Level Control: This RJ45 jack lets you plug in the optional PLC2 Punch Remote Level Control. This control is only functional when the amp’s crossover switch is set to Low-Pass (LP). Input: This 4-pin Molex connector works with the supplied RCA Input Harness. The amp will accept signals from either high-level (speaker) or low-level (RCA) sources. If connected to a high-level input signal, the amp’s auto turn-on feature is active. Note: For high-level input, you can either splice RCA plugs onto the source unit’s speaker wires, or cut the RCAs off of the supplied input harness and splice on speaker wires from the source unit using the standard wire color code (left=white, right=gray). Right Side of Amplifier. Power/Remote Terminals: The amplifier’s Power, Ground, and Remote terminals are located in a separate plug-in quick connector. The connector has compression terminals that will accept up to 8-gauge wire. When utilizing high-level signals for the auto turn-on feature is active, and the Remote terminal can be used as an output to turn on/off up to two additional amplifiers or other accessories. A small screwdriver (not included) is required to tighten/loosen the compression terminals. Once the wires are installed in the quick connector, the connector can be plugged into the amplifier. Speakers: This 4-pin Molex connector works with the supplied Speaker Output harness. The speaker wires can be spliced to the harness’ four 16-gauge wires and plugged into the amplifier. Note: For bridged mono operation, the left + and right – wires should be used to connect to the speaker (4 minimum). The item “ROCKFORD FOSGATE POWER T400X2AD MOTORCYCLE CAR AMP 525 + WATT 2 CHANNEL CLASS AD” is in sale since Monday, March 23, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers”. The seller is “a2z-car-audio-superstore” and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Rockford Fosgate
  • Model: T400X2AD PBR300X2
  • MPN: T400X2AD
  • Channels: 2/1
  • RMS Power: 525 +
Rockford Fosgate R250x4 Car Audio 4-channel Class Ab Amp Amplifier 250w Rms

WELCOME TO DISCOUNT CENTRAL ONLINE. Car Audio 4-channel Class AB Amplifier. Model: R250X4 Prime Series. 4 ohms: 40 watts x 4 channel. 2 ohms: 60 watts x 4 channel. Bridged, 4 ohms: 125 watts x 2 channel. LED power (green) and protect (red) indicators. Variable Bass Boost (0 to +12 dB bass boost at 45 Hz). 50 Amp In-line fuse is highly recommended. Heavy duty cast aluminum alloy heatsink for extreme heat dissipation. Variable high-pass filter (50-250 Hz, Butterworth 12 dB/octave). Variable low-pass filter (50-250 Hz, Butterworth 12 dB/octave). Dimensions: 11-1/4″L x 6-3/4″W x 2H. Screws, bass knobs, plastic coverings, protective films, etc. All DOA (Dead on Arrival)/ Defective items must be reported within 48 hours after receiving the item. When ordering for a Car Alarm Replacement remote make sure you are ordering the correct one or give us a call to check if it is compatible with your Car/ Car alarm. Physical damage: Item is scratched, torn, wet, burned, blown, signs of misuse, and faulty installation DEFECTIVE or non DEFECTIVE. Factory sealed items: If its opened and tampered except for certain items. The item “ROCKFORD FOSGATE R250X4 CAR AUDIO 4-CHANNEL CLASS AB AMP AMPLIFIER 250W RMS” is in sale since Wednesday, February 15, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers”. The seller is “discountcentralonline” and is located in Los Angeles, California. This item can be shipped to United States.
  • RMS Power: 250W
  • Channels: Mono
  • MPN: R2504
  • Model: R250-1
  • Brand: Rockford Fosgate